|
|
|
| The Calibration Method of the High-precision Thermometer for Seafloor Heat Flow Measurements |
| ZHOU Hang-xia1,YU Ke-guang2,XU Xing3 |
1. China Jiliang University, Hangzhou, Zhejiang 310018, China
2. Zhejiang Water Conservancy and Hydropower College, Hangzhou, Zhejiang 310018, China
3. Guangzhou Marine Geological Survey, Guangzhou, Guangdong 510760, China |
|
|
|
|
Abstract According to the changes in temperature and other parameters in the marine environment, combined with the characteristic of measuring temperature of the seafloor heat flow,the influence factors on the accuracy of seafloor thermometer and its calibration method are studied.According to the laboratory calibration data of the conductivity, temperature and depth instrument to amend the zero and temperature drift of the thermometer, and compared with the data in situ testing of the seafloor thermometer, marine experimental results show that the measurement error could be maintained at less than ±0.002℃ in the range of -2℃ to +32℃ by this method.
|
|
|
|
|
|
|
|
［1］Wu M Y,Li J G. Temperature Sensor of High CTD Profiler［J］.Ocean Technology, 2001,20(1):143-146.
［2］Bullard E C. The flow of heat through the floor of the Atlantic ocean［J］. Proceedings of the Royal Society of London, Series A, 1954, 222(1150):408-429.
［3］ Zhang Z Y. The Status and Development of CTD Measurement Technology［J］.Ocean Technology,2003,22(4):105-110.
［4］Damir Ilic＇,Josip Butorac＇ ,Luka Ferkovic＇ .Temperature measurements by means of NTC resistors and a two-parameter approximation curve［J］.Measurement,2008,41(3):294-299 .
［5］李亚敏,罗贤虎,徐行,等.南海北部陆坡深水区的海底原位热流测量［J］.地球物理学报,2010,53（9）:2161-2170.
［6］Wang Y,Li Z Q,Li Y,et al.Research on the Data Processing of Single Temperature Sensor CTD［J］.Hydrographic Surveying and Charting, 2009, 29(1): 62-65.
［7］崔志尚.温度计量与测试［M］.北京:中国计量出版社,1998.
［8］Yu H L,Jia Z J.Innovative Facility for Calibrating CTD Instruments［J］.Ocean Technology,2001,20(1):124-129. |
|
|
|
2011, Vol. 32 
