|
|
|
| Study on Multifunctional Laser Aiming Detector Based on Half Facular Point Optical Imagery |
| ZHU Ling-jian1,2,TAN Yu1,QIU Zong-ming 1,LIU Jun-hua2 |
1. Xi′an University of Technology, Xi′an, Shaanxi 710048, China
2. Xi′an Jiaotong University, Xi′an, Shaanxi 710049, China |
|
|
|
|
Abstract A multifunctional laser aiming detector applied on coordinate measurement machines was designed based on half facular point optical imagery.The designing thought and operation principle of the multifunctional aiming detector optical system was described in detail.An adaptive intensity control method was used in the circuit to adjust the laser intensity timely so that it can adapt to aiming measurement of different optical properties surface.Repeated aiming measurement experiments, linear sensitivity aiming measurement experiments and inclination tracking measurement experiments of the multifunctional detector were conducted in practice.The experimental results show that the measurement uncertainty of laser tracking aiming repeatability of the multifunctional detector is less than 1 μm with the measurement sensitivity of 30 mV/μm after calibration.The angle measure scale of laser tracking aiming is expected to 25° without any other accessorial equipment, which can be met the requirements of CMMs.This detector with characteristic of high detecting speed, high degree of automation and high aiming accuracy, will be expected to have the ability of free curved surface and imagery tracking aiming measurement of contour with higher speed and accuracy coincided with CMMs or other length measuring instruments and have a wide range of application prospects and a strong practical value for measuring parts profile with a higher precision.
|
|
|
|
|
|
|
|
［1］朱凌建, 刘君华, 张钟华,等.应用于三坐标测量机的半光斑成像式激光测头［J］.仪器仪表学报, 2008, 29(12):2465-2469.
［2］范哲光,费业泰,丁邦宙.光纤布拉格光栅三维测头［J］.计量学报,2010, 31(2):115-118.
［3］袁江,邱自学,邵建新.集成激光位移传感器和编码器的曲面仿形测头研究［J］.仪器仪表学报, 2010, 31(11):2488-2492.
［4］程方,费业泰.纳米三坐标测量机接触式测头触发控制［J］.光学精密工程,2010, 18(12):2603-2608.
［5］杨新刚,黄玉美,李艳,等.三维测头探测误差的评定准则及高精度评定方法研究［J］.计量学报, 2008, 29(3):207-210.
［6］赵念念, 朱凌建, 赵敏,等.多功能测头光学系统设计［J］.西安理工大学学报,2010,26(2):212-217.
［7］肖辉东.基于三坐标测量机新型非接触激光跟踪测头的研究［D］.西安:西安理工大学,2005.
［8］赵敏.一种跟踪式新型表面形状测头的研究［D］.西安:西安理工大学,2002. |
|
|
|
2012, Vol. 33 
