|
|
Study on Speed Compensation of Weigh-in-motion |
XU Zhi-ling,SHEN Pei-pei,LI Zhi-fei |
1. College of Modern Science and Technology, China Jiliang University, Hangzhou, Zhejiang 310018, China;
2.College of Metrology & Measurement Engineering, China Jiliang University, Hangzhou, Zhejiang 310018, China;
3.Hangzhou City of Quality and Technical Supervision and Testing Institute, Hangzhou, Zhejiang 310019, China |
|
|
Abstract To reduce the error value of weigh-in-motion caused by speeds, the physical model of vehicle is built, with analyzing the speeds on weighing accuracy, deducing their relationship and a compensative method of speeds. Then a weigh-in-motion dynamic model is built and simulated based on dynamic analysis of mechanical system. The result shows that the compensation effect is better and the accuracy of weigh-in-motion is improved, especially at the 8.33m/s, the maximum compensation amount reached 10% when the car weighed 20t.
|
Received: 20 November 2014
Published: 20 October 2015
|
|
|
|
|
[1]程路, 李青, 张宏建. 基于软质电容式称重传感器的车辆动态称重系统[J]. 计量学报, 2008, 29(4): 334-338.
[2]Ottosson A, Pedersen C, O’Connor A. Employing Train Weigh in Motion Data in Comparison of Cumulative Fatigue Damageon Bridges[J]. Procedia Social and Behavioral Sciences, 2012, 48: 148-153.
[3]马宾, 隋青美. 基于光纤微弯传感器的汽车动态称重系统设计[J]. 传感技术学报, 2010, 23(8): 1195-1200.
[4]殳伟群. 基于参数估计的动态称重新方法[J]. 计量学报, 1993, 14(2): 149-153.
[5]李青, 高志华, 潘岚, 等. 基于轮计量和系统模型的动态轨道称重系统[J]. 计量学报, 2001, 22(2): 142-146.
[6]田鑫, 苏清祖, 陈晓东, 等. 有限元分析在车辆行驶称重技术中的应用[J]. 农机化研究, 2005, 24(5): 253-255.
[7]张秀琴, 葛如海, 陈晓东, 等. 汽车油管式动态称重的仿真与分析[J]. 汽车工程, 2007, 29(3): 257-261.
[8]刘汉平, 王健刚, 陈冰泉. 汽车的运动速度对动态称重结果的影响[J]. 中外公路, 2006, 26(4): 231-234.
[9]张以诚. 基于速度补偿算法的激光测速传感器的设计与实现[D]. 太原:太原理工大学, 2010.
[10]吴义魁, 王琪, 江民俊, 等. 基于WSN的高速汽车动态载荷信号处理方法[J]. 微型机与应用, 2011, 30(9): 62-66.
[11]路永婕. 重载汽车与路面相互作用动力学研究[D]. 北京:北京交通大学, 2011.
[12]罗雁, 苏清祖, 陈晓东. 汽车行驶称重系统的算法研究与精度分析[J]. 汽车工程, 2005, 30(4): 495–497.
[13]张秀琴, 葛如海, 陈晓东, 等. 汽车油管式动态称重的仿真与分析[J]. 汽车工程, 2007, 29(3): 257-261.
[14]陈峰华. ADAMS2012虚拟样机技术从入门到精通[M]. 北京: 清华大学出版社, 2013. |
|
|
|