|
|
|
| ire Rope Defects with the Micro-magnetic NDT Technology |
| SHI Rong1,2,WEI Ying-jie1,2,WANG Jin-dong3 |
1.Key Laboratory of Advanced Forging & Stamping Technology and Science of Ministry of National Education,Yanshan University, Qinhuangdao, Hebei 066004, China;
2.Parallel Robot and Mechatronic System Laboratory of Hebei Province, Yanshan University, Qinhuangdao, Hebei 066004, China;
3.National Space Science Center, CAS, Beijing 100190, China |
|
|
|
|
Abstract With the purpose of applying micromagnetic detection technology to nondestructive testing for wire ropes,the finite element method is used for analysis of the feasibility of the broken wire defects detection,using the residual magnetic field of the wire rope itself without extra magnetic field excitation. The wire rope defect points and the leakage magnetic field strength in surrounding air,distribution and the testability have been calculated. Then the influence of the geomagnetic field has been discussed,which is a theoretical basis for micromagnetic detection technology. Moreover,the testing results and the change laws in different broken wires states,as well as the functional relationship between the rope metal sectional area loss and the outputs of the detection system,are obtained through the experimental researches of micromagnetic detection method for wire ropes,that have verified the feasibility and reliability of micromagnetic nondestructive testing technology.
|
|
|
|
|
|
［1］刘美全,徐章遂,陈鹏,等. 磁场作用下缺陷微磁生成机理研究［J］.计算机测量与控制,2010,18(2):437-439.
［2］任尚坤,李新蕾,任吉林,等. 金属磁记忆检测技术的物理机理［J］.南昌航空大学学报,2008,22(2):11-16.
［3］OSullivana D, Cotterella M, Meszarosb I. The characterisation of work-hardened austenitic stainless steel by NDT micro-magnetic techniques［J］. NDT & E International,2004,37(4): 265-269.
［4］Yanhua Sun, Yihua Kang. A new MFL principle and method based on near-zero background magnetic field［J］. NDT & E International ,2010,43(4):348-353.
［5］Wang Z D, Gu Y, Wang Y S. A review of three magnetic NDT technologies［J］. Journal of Magnetism and Magnetic Materials ,2012,324(4):382-388.
［6］邵长胜,王祥国,张永忠. 轨道微磁智能探伤检测系统的研制与应用［C］// 第四届中国国际轨道交通技术峰会暨第十二届粤、京、港、沪铁道学会学术年会论文集.上海:中国铁道学会,2008,120-121.
［7］张倩,胡仁喜,康士廷. ANSYS12.0 电磁学有限元分析从入门到精通［M］.北京:机械工业出版社,2010,1-20,186-200.
［8］兵器工业无损检测人员技术资格鉴定考核委员会. 常用钢材磁特性曲线速查手册［M］.北京:机械工业出版社,2003,20-50.
［9］高德章. 国际地磁参考场及其计算［J］.海洋石油,1999,(3):34-41.
［10］王劲东,赵华,周斌,等.火星空间环境磁场探测研究— “萤火1号”磁强计的研制与应用［J］.物理, 2009,38（11）:785-791.
［11］魏英杰.基于微磁原理的钢丝绳无损检测方法研究［D］. 秦皇岛:燕山大学,2012.
［12］王博. 穿过式线圈磁化的在线钢丝绳检测系统及应用［D］. 武汉:华中科技大学,2012.
［13］Schrems K K, Dogan C R, Hawk J A. Wear Mechanisms in a Nonrotating Wire Rope［J］. Journal of Materials Engineering and Performance,1995,4(2): 136-144.
［14］Jomdecha C, Prateepasen A. Design of modified electromagnetic main-flux for steel wire rope inspection［J］. NDT & E International,2009,42(1):77-83. |
|
|
|
2015, Vol. 36 
