|
|
Based on the GADF-TL-ResNeXt Rolling Bearing Fault Diagnosis Method |
HOU Dong-xiao1,ZHOU Zi-an1,CHENG Rong-cai1,YAN Shuang2 |
1. School of Control Engineering,Northeastern University at Qinhuangdao,Qinhuangdao,Hebei 066004,China
2.Jingneng Qinhuangdao Thermal Power Co. Ltd,Qinhuangdao,Hebei 066004,China |
|
|
Abstract To solve the problem that traditional diagnosis methods are difficult to extract fault features effectively, a fault diagnosis method based on Gramian angular field (GAF) and TL-ResNeXt is proposed. Firstly, GAF is used to encode the original vibration signal into a two-dimensional feature map of time series correlation. Then these feature maps are input into a deeper level of packet residual network ResNeXt for automatic recognition and classification. At the same time of model training, transfer learning (TL) module is combined in the last layer of the network to accelerate the feature extraction ability of the model and fast learning. In order to verify the effectiveness of the method, the bearing data of Case Western Reserve University are compared with other methods, and the results show that the method performed best. The bearing fault data collect on the rolling mill simulation test platform show that the method also has good generalization and recognition ability under different working conditions.
|
Received: 02 February 2023
Published: 10 October 2023
|
|
|
|
|
[13] |
Xu W, Wan Y, Zuo T Y, et al. Transfer Learning Based Data Feature Transfer for Fault Diagnosis[J]. IEEE Access, 2020, 8: 76120-76129.
|
[14] |
侯东晓, 穆金涛, 方成, 等. 基于GADF与引入迁移学习的ResNet34对变速轴承的故障诊断[J]. 东北大学学报(自然科学版), 2022, 43(3): 383-389.
|
[1] |
陈剑, 刘圆圆, 黄凯旋,等. 基于奇异值分解和独立分量分析的滚动轴承故障诊断方法[J]. 计量学报, 2022, 43(6): 777-785.
|
[2] |
Ye X, Hu Y, Shen J, et al. An Improved Empirical Mode Decomposition Based on Adaptive Weighted Rational Quartic Spline for Rolling Bearing Fault Diagnosis[J]. IEEE Access, 2020, 8: 123813-123827.
|
[3] |
Hou J, Wu Y, Gong H, et al. A Novel Intelligent Method for Bearing Fault Diagnosis Based on EEMD Permutation Entropy and GG Clustering[J]. Appl Sci, 2020, 10(1): 386.
|
[5] |
Wang H, Liu C, Du W, et al. Intelligent Diagnosis of Rotating Machinery Based on Optimized Adaptive Learning Dictionary and 1DCNN[J]. Appl Sci, 2021, 11(23): 11325.
|
[7] |
Yang J, Liu J, Xie J, et al. Conditional GAN and 2-D CNN for Bearing Fault Diagnosis With Small Samples[J]. IEEE Transactions on Instrumentation and Measurement, 2021, 70: 1-12.
|
[9] |
Wang Z G, Oates T. Imaging time-series to improve classification and imputation[C]//The 24th International Joint Conference on Artificial Intelligence(IJCAI). Buenos Aires, Argentina, 2015.
|
[10] |
庞新宇, 仝钰, 魏子涵. 一种GAF-CNN行星齿轮箱故障诊断方法[J]. 北京理工大学学报, 2020, 40(11): 1161-1167.
|
[11] |
He K M, Zhang X, Ren S, et al. Deep residual learning for image recognition[C]//IEEE Conference on Computer Vision and Pattern Recognition (CVPR), Seattle,America, 2016.
|
[12] |
Xie S, Girshick R, Dollár P, et al. Aggregated Residual Transformations for Deep Neural Networks[C]// Proceedings of the 2017 IEEE Conference on Computer Vision and Pattern Recognition, Seattle, America, 2017.
|
[15] |
Yan J, Kan J, Luo H. Rolling Bearing Fault Diagnosis Based on Markov Transition Field and Residual Network[J]. Sensors, 2022, 22(10): 3936.
|
[8] |
Han T, Tian Z, Yin Z, et al. Bearing fault identification based on convolutional neural network by different input modes[J]. J Braz Soc Mech Sci Eng, 2020, 42(9): 474.
|
[16] |
Wang Y M, Cheng L. A combination of residual and long-short-term memory networks for bearing fault diagnosis based on time-series model analysis[J]. Meas Sci Technol, 2021, 32(1): 5904.
|
|
Chen J, Liu Y Y, Huang K X, et al. Rolling bearing fault diagnosis method based on singular value decomposition and independent component analysis[J]. Acta Metrologica Sinica, 2022, 43(6): 777-785.
|
[4] |
Chen F F, Cheng M T, Tang B P, et al. Pattern recognition of a sensitive feature set based on the orthogonal neighborhood preserving embedding and adaboost SVM algorithm for rolling bearing early fault diagnosis[J]. Meas Sci Technol, 2020, 31(10): 105007.
|
[6] |
Li G, Deng C, Wu J, et al. Sensor Data-Driven Bearing Fault Diagnosis Based on Deep Convolutional Neural Networks and S-Transform[J]. Sensors, 2019, 19(12): 2750.
|
|
Pang X Y, Tong J, Wei Z H. A fault diagnosis method of GAF-CNN planetary gearbox[J]. Journal of Beijing Institute of Technology, 2020, 40(11): 1161-1167.
|
|
Hou D X, Mu J T, Fang C, et al. Fault diagnosis of variable speed bearings based on GADF and ResNet34 with transfer learning[J]. Journal of Northeastern University (Natural Science Edition), 2022, 43(3): 383-389.
|
[17] |
Li H, Huang J, Ji S. Bearing Fault Diagnosis with a Feature Fusion Method Based on an Ensemble Convolutional Neural Network and Deep Neural Network[J]. Sensors, 2019, 19(9): 2034.
|
|
|
|