|
|
|
| Estimation Method of the Effect on the Transition Temperature ofthe Trace Impurities in Freezing Point of Zinc Based on the Scheil Equation |
| SUN Jian-ping1,DENG Xiao-long2,ZHANG Jin-tao1 |
|
|
|
|
Abstract Trace impurities in the defining fixed-point metals are usually the most significant source of uncertainty in the realization of ITS-90.A mathematical model is built based on the Scheil equation from the solidification theory to estimate the trace impurities effect on the phase transition temperature of freezing point. The national primary standards of temperature of the fixed point of zinc is studied, the least squares method is used to fit experimental data to estimate the impurities effect on the phase transition temperature. The validity of this method would be proved by chemical analysis. The results show that the phase transition temperature of the zinc freezing point is 0.56 mK higher than the phase transition temperature of the ideal pure zinc since the impurities present, and the higher concentrations of the Ag and Cu in the zinc prove the validity of this method.The foreground of application of this method is better than SIE and OME methods.
|
|
|
| About author:: 作者简介:孙建平（1978-）,男,陕西眉县人,中国计量学研究院副研究员,主要研究方向为温度及材料热物性计量。sunjp@nim.ac.cn |
|
|
|
［1］Strouse G F, Guthrie W F, Mangum B W. Summary of comparison of realizations of the ITS-90 over the range 83.8058K to 933.473K: CCT key comparison CCT-K3［J］. Metrologia, 2002,39(2): 179-206.
［2］Fellmuth B, Hill K D, Bloembergen P, et al.Methodologies for the Estimation of Uncertainties and the Correction of Fixed-Point Temperatures Attributable to the Influence of Chemical Impurities［R］. CCT/05-08, 2005.
［3］Rudtsn S, Fabr M, Ficher J, et al. High-purity fixed points of the ITS-90 with traceable analysis of impurity contents［J］.Int J Thermophys, 2008,29(1):139-150.
［4］Head D I, Petchpong P, Au Joe Y H. Effects of Impurities on the Melting Curve of the Aluminium Fixed point［J］.计量学报,2008,29(5A):90-94.
［5］Ancsin J. Impurity Dependence of the Zn Point［J］. Metrologia, 2007,44(5): 303-307.
［6］Zhang J, Rudtsch S. The Influence of Antimony on the Tin Point［J］. Int J Thermophys, 2008, 29(1):151-157.
［7］Fellmuth B, Hill K D. Estimating the Influence of Impurities on the Freezing Point of Tin ［J］. Metrologia, 2006, 43(1): 71-83.
［8］余永宁. 金属学原理［M］. 北京:冶金工业出版社, 2007.
［9］Strouse G F. NIST Methods of Estimating the Impurity Uncertainty Component for ITS-90 Fixed-Point Cells from the Ar TP to the Ag FP［R］.CCT/03-19,2003.
［10］White D R, Mason R S. Improved Initiation Technique for the Metal Fixed points［J］. Int J Thermophys, 20011, 32(1-2):348-359.
［11］Ancsin J. Impurity Dependence of the Zn Point［J］. Metrologia, 2007,44(5): 303-307.
［12］Massalski T B, Okamoto H, Subramanian P R, et al.Phase Diagrams for Binary Alloys［M］.Ohio:ASM International,2010.
［13］Rudtsch S, Fahr M. Improved characterization and certification procedure for fixed-point cells ［J］. 计量学报, 2008, 29(5A):82-85. |
|
|
|
2015, Vol. 36 
