|
|
|
| 100kN·m Deadweight Torque Standard Machine |
| ZHANG Zhi-min,HU Gang,ZHANG Yue,MENG Feng,ZHANG Wei |
| National Institute of Metrology, Beijing 100029, China |
|
|
|
|
Abstract A set of 100kN·m deadweight torque standard machine is newly developed at National Institute of Metrology. The knife edge support mechanism with high precision and large load capacity is adopt to support moment arm at the fulcrum, the moment-arm adopts the single beam structure and is equipped with the arm limit protection mechanism, the weight loading system adopts the combination of inner and outer ring weight group and lifting mechanism. The working principle and mechanical structure of the machine are introduced, the results of performance test and uncertainty assessment are described. The theoretical analysis and performance tests show that the repeatability is smaller than 5×10-5,the uncertainty is less than 1×10-4 (k=3) in the range of 1kN·m to 100kN·m.
|
|
Received: 05 July 2021
Published: 14 October 2022
|
|
|
| Fund:National Key R&D Program of China |
|
|
|
［1］Rske D, Adolf K. Specifications and Uncertainty of Measurement of the PTBs 1kN·m Torque Standard Machine［C］//Proceedings of the 14th IMEKO TC3 Conference. Warsaw, Poland, 1995:174-176.
［2］Ohgushi K, Ota T, Ueda K, et al. Design and Development of 20kN·m Deadweight Torque Standard Machine［C］//Proceeding of the 18th IMEKO TC-3 International Conference. Shanghai, China, 2002.
［3］Schlegel C, Kahmann H, Weidinger P, et al. Principle and design of a 5MN·m torque standard machine［C］//IMEKO TC3, TC5 and TC22 International Conference 2017. Helsinki, Finland, 2017.
［4］张智敏, 李涛, 张跃, 等. 全自动高准确度100N·m扭矩标准机［J］. 计量学报, 2010, 31(1): 1-4.
Zhang Z M, Li T,Zhang Y, et al. A Full-automatic High Accuracy 100Nm Torque Standard Machine［J］. Acta Metrology Sinica,2010, 31(1): 1-4.
［5］张智敏, 李涛, 张跃, 等. 高准确度微小扭矩标准装置研究［J］. 计量学报, 2018, 39(2): 155-158.
Zhang Z M, Li T, Zhang Y, et al. Research on High Accuracy Torque Standard Machine［J］. Acta Metrology Sinica, 2018, 39(2): 155-158.
［6］Zhang Z M, Zhang Y, Li T, et al. The Design of 20kN·m Torque Standard Machine at NIM［C］//IMEKO XXI World Congress. Czech, Portugal, 2015.
［7］Zhang Z M, Hu G, Zhang Y, et al. Design of 100kN·m Deadweight Torque Standard Machine［C］//Asia Pacific Measurement Forum on Mechanical Quantities, APMF 2019. Niigata, Japan, 2019.
［8］潘健生, 周敬恩, 王广生. 金属热处理工艺, 4版［M］. 北京: 机械工业出版社, 2013.
［9］成大先, 王德夫, 刘世参, 等. 机械设计手册, 5版［M］. 北京: 化学工业出版社, 2013, 4-72.
［10］张智敏, 张跃, 孟峰, 等. 基于空气轴承支撑技术的高准确度大扭矩标准装置研究［J］. 计量学报, 2021, 42(3): 271-275.
Zhang Z M, Zhang Y, Meng F, et al. Research on High Accuracy Large Torque Standard Machine Based on Air Bearing Technology［J］. Acta Metrology Sinica, 2021, 42(3): 271-275. |
|
|
|
2022, Vol. 43 
