一种黏温修正方法的研究与建立

doi:10.3969/j.issn.1000-1158.2022.01.09

Abstract
Figure/Table
References (27)
Related Citation (15)

Download: PDF (2221 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract In order to improve the calibration accuracy of viscometer in non-standard environment laboratory, the viscosity-temperature characteristics of refined petroleum products and refined methylsilicone oil standard viscosity liquids were systematically studied according to experimentally certified viscosity-temperature data. The Walther equation and Arrhenius equation were selected and optimized, and then the kinematic viscosity-temperature correction method of refined petroleum products standard viscosity liquids and the dynamic viscosity-temperature correction method of refined methylsilicone oil standard viscosity liquids were established with the certified values of 20℃ and 25℃ as the reference point. The results show that the maximum deviation between the calculated value and the certified value is 0.65%. The viscosity-temperature correction method used in the calibration of working viscometer is feasible to a certain extent, more accurate viscosity temperature correction in non-standard environment laboratory is realized.

Key words： metrology viscosity temperature viscosity-temperature characteristic viscosity-temperature correction method

Received: 27 March 2020 Published: 06 January 2022

PACS:

TB933

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JIN Yuan
	ZHU Xuan-hua
	QIAO Jia-guang

Cite this article:

JIN Yuan,ZHU Xuan-hua,QIAO Jia-guang. Study and Establishment of a Viscosity-temperature Correction Method[J]. Acta Metrologica Sinica, 2022, 43(1): 57-64.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2022.01.09 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2022/V43/I1/57

［1］黄孟孟. 非牛顿流体黏度计量标准研制［D］. 北京: 北京化工大学, 2017.
［2］邵鸿飞, 高岩立, 任万杰, 等. 溶液型非牛顿流体黏度标准物质的研制［J］. 化学分析计量, 2019, 28(1): 6-8.
Shao H F, Gao Y L, Ren W J, et al. Preparation of viscosity standard reference materials for solution-type non-newtonian fluid［J］. Chemical Analysis and Meterage, 2019, 28(1): 6-8.
［3］梁秀丽, 张坤, 荀其宁, 等. 血液黏度计校准用标准物质的研制［J］. 计量与测试技术, 2015, 42(7): 53-55.
Liang X L, Zhang K, Xun Q N, et al. The development of blood viscosity meter calibration standard material［J］. Metrology & Measurement Technique, 2015, 42(7): 53-55.
［4］王星, 潘义, 张鹏辉, 等. 黏度标准物质研制［J］. 中国测试, 2015, 41(5): 5-8.
Wang X, Pan Y, Zhang P H, et al. Development of reference materials of viscosity［J］. China Measurement & Test, 2015, 41(5): 5-8.
［5］何飞飞, 李劲松, 吴鸿宾. 粘温曲线的建立对旋转粘度计现场校准作用的探讨［J］. 计量学报, 2017, 38(S1): 142-145.
He F F, Li J S, Wu H B. Discussion on the effect of the constructing of viscosity-temperature curve in the ｒotational viscometer field calibration［J］. Acta Metrologica Sinica, 2017, 38(S1): 142-145.
［6］马敬东. 粘度测量中的温度修正及其应用［J］. 上海计量测试, 2005, 32(2): 31-32.
Ma J D. Temperature correction in viscosity measurement and its application［J］. Shanghai Measurementand Testing, 2005, 32(2): 31-32.
［7］刘元俊. 二级标准粘度液定值的不确定度评定［J］. 化学分析计量, 2004, 13(2): 10-13.
Liu Y J. Evaluation of the uncertainty of measurement of secondary standard viscosity liquids［J］. Chemical Analysis and Meterage, 2004, 13(2): 10-13.
［8］付欣艳. 标准粘度液测量结果不确定度分析及评定［J］. 计量与测试技术, 2010, 37(5): 62-64.
Fu X Y. The analysis and evaluation of uncertainly in measurement on standard liquids of viscosity［J］. Metrology & Measurement Technique, 2010, 37(5): 62-64.
［9］宋健. 标准毛细管黏度计测量黏度液的不确定度评定［J］. 计量与测试技术, 2008, 35(10): 45-46.
Song J. Evaluation of uncertainty f or measuring viscosity l iquid by standard capillary viscometer［J］. Metrology & Measurement Technique, 2008, 35(10): 45-46.
［10］王松岭. 流体力学［M］. 北京: 中国电力出版社, 2007: 26-28.
［11］ Singh A K, Mukherjee P S, Mishra N M. Interrelationship among viscosity, temperature and age of lubricant［J］. Industrial Lubrication and Tribology, 2006, 58(1): 50-55.
［12］ Namburu P K, Kulkami D P, Misra D, et al. Viscosity of copper oxide nanoparticles dispersed in ethylene glycol and water mixture［J］. Experimental Thermal and Fluid Science, 2007, 32(2): 397-402.
［13］ Valeri D, Meirelles A J A. Viscosities of fatty acids, triglycerides, and their binary mixtures［J］. Journal of the American Oil Chemists Society, 1997, 74(10): 1221-1226.
［14］ Noureddini H, Teoh B C, Clements L D. Viscosities of vegetable oils and fatty acids［J］. Journal of the American Oil Chemists Society, 1992, 69(12): 1189-1191.
［15］ Serrano-López R, Fradera J, Cuesta-López S. Molten salts database for energy applications［J］. Chemical Engineering & Processing Process Intensification, 2013, 73(7): 87-102.
［16］ Monnery W D, Svrcek W Y, Mehrotra A K. Viscosity: A critical review of practical predictive and correlative methods［J］. Canadian Journal of Chemical Engineering, 1995, 73(1): 3-40.
［17］ Yaws C L, Lin X Y, Li B. Calculate viscosities for 355 liquids［J］. Chemical Engineering, 1994, 101(4): 119.
［18］ Kulkarni D P, Das D K, Chukwu G A. Temperature dependent rheological property of copper oxide nanoparticles suspension (nanofluid)［J］. Journal of Nanoscience & Nanotechnology, 2006, 6(4): 1150-1154.
［19］ Stanciu I. Rheological properties of mineral oil［J］. Journal of Science and Arts, 2011, 4(17): 487-490.
［20］ Aworanti O A, Agarry S E, Ajani A O. A laboratory study of the effect of temperature on densities and viscosities of binary and ternary blends of soybean oil［J］. Soy Biodiesel and Petroleum Diesel Oil, 2012, 2(4): 444-452.
［21］王志芳, 刘逸飞, 傅行军, 等. 润滑油黏温特性实验研究［J］. 润滑与密封, 2016, 41(4): 24-28.
Wang Z F, Liu Y F, Fu X J, et al. Experiment study on viscosity-temperature correlation of lubricating oils［J］. Lubrication Engineering, 2016, 41(4): 24-28.
［22］王燕霜, 承军伟. 航天轴承润滑油黏温特性及流变特性试验分析［J］. 轴承, 2015, 432(11): 39-41.
Wang Y S, Cheng J W. Experimental analysis on viscosity-temperature characteristic and rheological behavior of lubricating oils for space bearings［J］. Bearing, 2015, 432(11): 39-41.
［23］王颖文, 张欣, 孙建平, 等. -38. 8344～156. 5985℃温区温标偏差方程外推和内插研究［J］. 计量学报, 2018, 39(6): 816-821.
Wang Y W, Zhang X, Sun J P, et al. Research on extrapolation and interpolation of temperature scale deviation equation over the temperature -38.8344～156.5985℃［J］. Acta Metrologica Sinica, 2018, 39(6): 816-821.
［24］刘园园, 杨健, 赵希勇, 等. GUM法和MCM法评定测量不确定度对比分析［J］. 计量学报, 2018, 39(1): 135-139.
Liu Y Y, Yang J, Zhao X Y, et al. Comparative analysis of uncertainty measurement evaluation with GUM and MCM［J］. Acta Metrologica Sinica, 2018, 39(1): 135-139.

［25］陈凌峰. 抽样引起的测量不确定度评定［J］. 计量学报, 2020, 41(7): 891-896.
Chen L F. Evaluating the Sampling Contribution to the Measurement Uncertainty［J］. Acta Metrologica Sinica, 2020, 41(7): 891-896.

［26］陈凌峰. 标准不确定度A类评定中极差法的深入讨论［J］. 计量学报, 2019, 40(2): 347-352.
Chen L F. The Further Discussion of the Range Method in the Type AEvaluation of Sstandard Uncertainty［J］. Acta Metrologica Sinica, 2019, 40(2): 347-352.
［27］叶德培. 一级注册计量师基础知识及专业实务:4版［M］. 北京:中国质检出版社, 2017: 333-334.