先进测量实验区素地环境振动实测与分析

doi:10.3969/j.issn.1000-1158.2021.10.10

Abstract
Figure/Table
References (14)
Related Citation (15)

Download: PDF (1878 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract The measurement and analysis of environmental vibration in plain land is of great significance for the construction of advanced measurement laboratory, which can be used to guide the applicability of the construction site selection of advanced measurement laboratory and the design of environmental vibration control. Taking the location of the advanced measurement experiment area of NIM as an example, the environmental excitation method is used to test the environmental vibration of the advanced measurement experimental area, and the 1/3 octave band analysis method is used to process the velocity time history data. The results show that: under steady-state conditions, the vibration index of the plot in the frequency band of 1~100Hz is lower than VC-F standard, but the maximum vibration velocity in the frequency band of 12.5~20Hz is close to or greater than VC-G standard. It is found that the vibration source in this frequency band comes from the random vibration caused by the loading and unloading of goods at the container terminal between 21:00 and 10:00 the next day, and the removal of the container terminal will help to meet the requirements of the laboratory vibration control standard VC-G. affected by the operation of a large bus under the specified conditions, the best setback distances required by the environmental vibration standards VC-G, VC-F and VC-E in the frequency band of 8~25 Hz are 195m, 182m and 160m respectively. The test and analysis of the environmental vibration of the surrounding road traffic under different conditions can accurately determine the best setback distances for the construction of different environmental vibration standards laboratories.

Key words： metrology environmental vibration laboratory ground 1/3 octave band actual measurement analysis

Received: 26 January 2021 Published: 18 October 2021

PACS:

TB936

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WANG Hong-jun
	LIU Zhi-hua
	DONG Yu-ping

Cite this article:

WANG Hong-jun,LIU Zhi-hua,DONG Yu-ping. Measurement and Analysis of Environmental Vibration of Plain Ground in Advanced Measurement Experimental Area[J]. Acta Metrologica Sinica, 2021, 42(10): 1323-1327.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2021.10.10 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2021/V42/I10/1323

［1］夏禾, 张楠. 车辆与结构动力相互作用［M］. 2版. 北京:科学出版社, 2005.
［2］陈霖新, 等编著. 洁净厂房的设计与施工［M］. 北京:化学工业出版社, 2005.
［3］夏禾. 交通环境振动工程［M］. 北京: 科学出版社, 2010.
［4］岳建勇. 软土地基精密装置基础微振动控制技术与工程应用［J］. 建筑科学, 2020, 36(s1):57-67.
Yue J Y. Micro vibration control technology and engineering application of precision device foundation in soft soil foundation ［J］. Architectural science, 2020, 36(s1):57-67.
［5］于梅. 振动基标准装置隔振技术的研究与应用［J］. 计量学报, 2009, 30(4):328-331.
Yu M. Research and application of vibration isolation technology of the vibration standard devices ［J］. Acta metrologica Sinica, 2009, 30 (4):328-331.
［6］Soueid A, Amick H, Zsirai T, et al. Addressing the environmental challenges of the NIST Advanced Measurement Laboratory［C］. Proceedings of SPIE-The International Society for Optical Engineering, 2005, 5933:59330N-13.
［7］刘善良, 吴书清, 冯金扬, 等. 第10届全球绝对重力仪关键比对相对重力测量［J］. 计量学报, 2020, 41(2):198-201.
Liu S L, Wu S Q, Feng J Y, et al. Relative gravity measurement campaign during the 10th international comparison of absolute gravimeters ［J］. Acta metrologica Sinica, 2020, 41 (2):198-201.
［8］Xu R , Li X , Yang W, et al. Field Measurement and Research on Environmental Vibration due to Subway Systems: A Case Study in Eastern China［J］. Sustainability, 2019, 11(23):1-12.
［9］Girish K M, Vinod P, Shashikumar P V. A Comparative study on road traffic and metro train induced ground vibration at CMTI for establishment of nano technology facilities［J］. Applied Mechanics and Materials, 2014, 592-594:1991-1995.
［10］Gordon C.Generic criteria for vibration-sensitive equipment［J］. Proceedings of SPIE-The International Society for Optical Engineering, 1992, 16(19):71-85.
［11］Amick H, Gendreau M, Busch T, et al. Evolving criteria for research facilities:vibration［C］//Buildings for Nanoscale Research＆Beyond, San Diego, CA, US, 2005.
［12］Cai C G, Zhou B, Li J S. Vibration criteria for vibration sensitive laboratory based on intrinsic microseism［C］//The 6th International Symposium on Precision Mechanical Measurements, Guiyang. Pros of the SPIE, 2013, 1-4.
［13］GB 51076-2015 电子工业防微振工程技术规范［S］. 2015.
［14］岳建勇, 蔡忠祥, 童园梦. 道路交通激发的特殊精密仪器基础振动现场实测与数值分析［J］. 建筑科学, 2020, 36(s1):239-244.
Yue J Y, Cai Z X, Tong Y M. Field measurement and numerical analysis of special precision instrument foundation vibration excited by road traffic［J］. Architectural science, 2020, 36 (s1): 239-244.