|
|
|
| The Evaluation of Uncertainty of Valuing System for Heat Sink |
| SUN Dao-an,LÜ Jian,LI Chun-ying,DU Yong-mei,WANG Zhi-xuan, ZHANG Jian-wei,ZHANG Gao |
| State Key Laboratory of Fluorine & Nitrogen Chemical, Xi´an Modern Chemistry Research Institute, Xi´an, Shaanxi 710065, China |
|
|
|
|
Abstract Heat sink is the characteristic parameter weighing the heat absorption capacity of endothermic hydrocarbon fuels (EHFs). Measuring the heat sink with high efficiency and accuracy is the premise and key technology for the engineering application of EHFs to hypersonic aerocrafts. A high accurate and automated valuing system for heat sink was developed according to the functional modularity design philosophy. On this basis, main uncertainty contributions were analyzed and then the uncertainty of the valuing system for heat sink was evaluated referring to JJF1059 Evaluation and Expression of Uncertainty in Measurement. The results showed that the expanded uncertainty of the valuing system is 2.48% (k=2). The valuing system for heat sink provides a strong support to the metering of the heat absorption capacity of EHFs as well as a basis for the subsequent development of the reference material of heat sink.
|
|
Received: 06 January 2020
Published: 24 May 2021
|
|
|
| Fund:National Natural Science Foundation of China |
|
|
|
［1］Sun D A, Li C Y, Du Y M, et al. Effects of endothermic hydrocarbon fuel composition on the pyrolysis and anti-coking performance under supercritical conditions ［J］. Fuel, 2019, 239: 659-666.
［2］Chen T, Zhang J, Wang L, et al. A study of methylcyclohexane cracking in a micro-channel reactor coated with M/SiO2 (M= Fe, Co, Ni) catalysts under supercritical conditions［J］. Journal of Analytical and Applied Pyrolysis, 2019, 141: 104642.
［3］刘小勇, 张香文, 方文军, 等. 吸气式发动机燃料研究进展及展望［J］. 推进技术, 2018, (10): 37-41.
Liu X Y, Zhang X W, Fang W J, et al. Fuel demand and future prospect for air-breathing aerospace engines ［J］. Journal of Propulsion Technology, 2018, (10): 37-41.
［4］刘朝, 邱舒怿, 黄红梅, 等. 吸热型碳氢燃料正辛烷的热分解机理［J］. 材料导报, 2019, 33(8): 1251-1256.
Liu Z, Qiu X Z, Huang H M, et al. Mechanism of thermal decomposition of endothermic hydrocarbon fuel n-octane ［J］. Materials Reports, 2019, 33(8): 1251-1256.
［5］Zhang J, Chen T, Yao P, et al. Catalytic Cracking of n-Decane over Monometallic and Bimetallic Pt-Ni/MoO3/La-Al2O3 Catalysts: Correlations of Surface Properties and Catalytic Behaviors［J］. Industrial & Engineering Chemistry Research, 2019, 58(5): 1823-1833.
［6］贺芳, 米镇涛, 孙海云. 提高烃类燃料热沉的研究进展［J］. 化学进展, 2006, 18(7/8): 1041-1048.
He F, Mi Z T, Sun H Y. Improvement of heat sink of endothermic hydrocarbon fuels ［J］. Progress in Chemistry, 2006, 18(7/8): 1041-1048.
［7］Sun D A, Du Y M, Zhang J W, et al. Effects of molecular structures on the pyrolysis and anti-coking performance of alkanes for thermal management［J］. Fuel, 2017, 194: 266-273.
［8］Liu Z H, Bi Q C, Feng J. Evaluation of heat sink capability and deposition propensity of supercritical endothermic fuels in a minichannel［J］. Fuel, 2015, 158: 388-398.
［9］贺宇锋, 郭亚军, 冯松, 等. 超临界压力下乳化煤油比定压热容测量［J］. 推进技术, 2018, 39(7): 1660-1666.
He Y F, Guo Y J, Feng S, et al. Measurement of isobaric specific heat of emulsified kerosene at supercritical pressure ［J］. Journal of Propulsion Technology, 2018, 39(7): 1660-1666.
［10］叶德培. 测量不确定度理解评定与应用［M］. 北京: 中国计量出版社, 2013.
［11］沈超, 裴全斌, 刘博韬, 等. 流量积算仪计量标准装置不确定度评定［J］. 计量学报, 2017, 38(3): 333-335.
Sen C, Fai Q B, Liu B T. The evaluation of uncertainty of flow totalizer standard facility ［J］. Acta Metrologica Sinica, 2017, 38(3): 333-335.
［12］孙桥, 白杰, 杜磊, 等. 高转速标准装置研究与建立［J］. 计量学报, 2018, 39(2): 71-74.
Sun Q, Bai J, Du L, et al. Research on high rotational speed standard device ［J］. Acta Metrologica Sinica, 2018, 39(2): 71-74.
［13］姜蕾, 刘朝晖, 毕勤成, 等. 碳氢燃料变压力过程中传热研究［J］. 推进技术, 2014, 35(7): 965-972.
Jiang L, Liu Z H, Bi Q C, et al. Heat transfer of hydrocarbon fuel during transient pressure ［J］. Journal of Propulsion Technology, 2014, 35(7): 965-972. |
|
|
|
2021, Vol. 42 
