|
|
|
| Analysis of Error Factor Impacting on the Performance of Laser-driver Injection Compound Lens |
| BAI Zhan-wei1,XIE Zhi-jiang2,YUAN Xiao-dong3 |
1.Mechanical Engineering Departmeng, Chongqing Institute of Engineering, Chongqing 400037, China;
2.State Key Lab of Mechanical Transmission, Chongqing University, Chongqing 400044, China;
3.Research Center of Laser Fusion, China Academy of Engineering Physics, Mianyang, Sichuan 621900, China |
|
|
|
|
Abstract During the study of all kinds of tolerance influencing factors on the performance of injection compound lens made of high power laser inertial confinement fusion drive,analysis shows that geometry dimension tolerance of the lens,lens assembly tolerance and compound lens have a significant effect on the perfomance of compound lens focal length tolerance,focal spot position and wave aberration.According to the main influencing factors,related performance mathematical models are set up.The models are simulated and the results of simulation are analyzed based on the software platform of Matlab and Zemax. The manufacturing and installation tolerance ensuring the performance are also determined based on the simulation results and tolerance of compound lens.
|
|
|
|
|
|
［1］范滇元,张小民.激光核聚变与高功率激光:历史与进展［J］.物理,2010,39(9):589-595.
［2］王方,朱启华,蒋东镔,等.多程放大系统中透镜倾斜对系统像差的影响分析［J］.激光技术,2007,31(3):333-336.
［3］刘红婕,景峰,李强,等.高功率固体激光装置空间滤波器小孔对输出光束质量的影响［J］.云南大学学报(自然科学版),2005,27 (5A) :184-189.
［4］刘红婕,刘兰琴,粟敬钦,等.基于鬼像和像差分析的高功率激光装置透镜设计［J］.光学学报,2008,28(5):976-980.
［5］王方,朱启华,徐冰,等.离轴多程放大系统中光学设计的初步［J］.强激光与粒子束,2005,17(12):1843-1846.
［6］马宏,王金波.仪器精度理论［M］.北京:北京航空航天大学出版社,2009:263-312.
［7］邵晶,马冬梅,聂真威.不同Zernike多项式求取环孔径波面像差的研究［J］.应用光学,2010,31(4):544-547.
［8］徐晨,陈磊.干涉仪标准面非旋转对称误差的消除［J］.计量学报,2010,30(3): 219-222.
［9］刘志祥.大口径光学系统波前分析技术研究［D］.北京:中国科学院研究生院,2008. |
|
|
|
2014, Vol. 35 
