|
|
|
| Projection Method Measurement on Non-rigidity Gear Pitch Cumulative Errors |
| XU Yao-dong1,2,ZHENG Wei1,2 |
1.Shanghai University of Engineering Science, Shanghai 200437, China;
2.Shanghai Industrial Masters College, Shanghai 200437, China |
|
|
|
|
Abstract To resolve the problem of micro gear or non-rigidity gear position alteration errors, a non-contact projection measurement method is adopted. Appling projection measurement appliance and rotary table by single pitch method and span pitch add-on spot method, through compensation of division errors of rotary table, gear pitch cumulative errors measurement is finished which is proved reasonable by absolute method measurement. Through analysis of the install gear eccentric errors, instrument measuring errors and aiming alignment errors, the gear pitch cumulative errors uncertainty is got about ±65μm by single pitch method and ±64μm by span pitch add-on spot method which all meet the demand of measurement precision. Finally, a conclusion is made that the tested non-rigidity plastic gear precision level is confirmed as 10 level by both measuring methods. By comparison, span pitch add-on spot method has more advantage in less measuring times and easy control in gear pitch cumulative errors measurement.
|
|
|
|
|
|
［1］周运良.极限配合与技术测量［M］.北京：中国劳动社会保障出版社, 2007, 108-109.
［2］曹爱文,陈定溪,张海.三坐标测量机在齿轮齿距偏差测量中的应用［J］.工具技术, 2008, 42(12):99-101.
［3］许耀东,郑卫.软质齿轮影像法测量及系统误差和随机误差分析［J］.光学技术, 2010, 36(5):744-748.
［4］陈向伟,王龙山,刘庆民.图像测量技术在微型齿轮测量中的应用［J］.半导体光电, 2004, 25(6):465-468.
［5］郭敬滨,张大厦,张继承,等. 大齿轮测量中补偿安装偏心的研究［J］. 计量学报, 2011, 32(2):118-122.
［6］芮会会,卢荣胜,刘宁.直齿圆柱渐开线齿轮影像测量的图像处理技术［J］.工具技术, 2010, 44(9):90-93.
［7］中国机械工业联合会. JB/T 4370—2001回转工作台［S］.2002.
［8］张泰昌.齿轮检测500问［M］.北京：中国标准出版社, 2007, 61-102.
［9］GB/T 10095.1—2008圆柱齿轮精度制第1部分:轮齿同侧齿面偏差的定义和允许值［S］.2008.
［10］许耀东,郑卫.渐开线塑料齿轮齿廓偏差影像法测量的不确定度和抽样检验统计特性［J］.机械传动, 2012, 36(12):48-51.
［11］陈慧灵,钱征宇. 试验筛影像测量新方法及其测量不确定度分析［J］. 计量技术, 2011, (6):35-37.
［12］国家质量技术监督局. JJF 1059—1999 测量不确定度评定与表示［S］.1999. |
|
|
|
2014, Vol. 35 
