3D打印复杂点阵结构的缺陷三维可视化方法

doi:10.3969/j.issn.1000-1158.2020.09.07

Abstract
Figure/Table
References (19)
Related Citation (6)

Download: PDF (1015 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Due to the complex lattice structure of 3D printing is prone to defects such as cracks, unfused or holes, and its seriously affect the functional performance of structural parts, a 3D visual inspection method for 3D printed defects in a complex lattice structure was studied. Based on gray value difference feature of internal defect in CT images of lattice structure, a class of defects were automatic identified and segmented by using the collective gray value method, and the segmented defect image sequence was 3D reconstructed by using ray-casting method. The experiment results showed that the method proposed can effectively obtained a three-dimensional view of a typical defect inside the lattice structure, and from which the shape and size of defect can be described. A strong basis for further analysis of the impact of defects on structural performance is provided.

Key words： metrology 3D printing lattice structure three-dimensional visualization set gray value method;defect detection

Received: 20 September 2019 Published: 28 August 2020

PACS:

TB96

Corresponding Authors: Yu-yan ZHANG E-mail: yyzhang@ysu.edu.cn

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	WEN Yin-tang
	GAO Ting-ting
	ZHANG Yu-yan

Cite this article:

WEN Yin-tang,GAO Ting-ting,ZHANG Yu-yan. 3D Visualization Method for Complex Lattice Structure Defects in 3D Printing[J]. Acta Metrologica Sinica, 2020, 41(9): 1077-1081.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2020.09.07 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2020/V41/I9/1077

［1］Prakash K S, Nancharaih T, Rao V V S. Additive Manufacturing Techniques in Manufacturing-An Overview［J］. Materials Today: Proceedings, 2018, 5(2): 3873-3882.
［2］Pereira T, Kennedy J V, Potgieter J. A comparison of traditional manufacturing vs additive manufacturing, the best method for the job［J］. Procedia Manufacturing, 2019, 30: 11-18.
［3］王向明, 苏亚东, 吴斌, 等. 微桁架点阵结构在飞机结构、功能一体化中的应用［J］. 航空制造技术, 2018, 61(10): 16-25.
Wang X M, Sun Y D, Wu B, et al. Application for Additive Manufacturing of Lattice Materials on Integrated Aircraft Structures and Functions［J］. Aeronautical Manufacturing Technology, 2018, 61(10): 16-25.
［4］易长炎, 柏龙, 陈晓红, 等. 金属三维点阵结构拓扑构型研究及应用现状综述［J］. 功能材料, 2017, 48(10): 10055-10065.
Yi C Y, Bai L, Chen X H, et al. Review on the metal three-dimensional lattice topology configurations research and application status［J］. Journal of Functional Materials, 2017, 48(10): 10055-10065.
［5］Galy C, Le Guen E L, Lacoste E, et al. Main defects observed in aluminum alloy parts produced by SLM: From causes to consequences［J］. Additive Manufacturing, 2018, 22: 165-175.
［6］Liu L, Kamm P, Garcia-Moreno F, et al. Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting［J］. Journal of the Mechanics and Physics of Solids, 2017, 107: 160-184.
［7］潘钊, 温银堂, 郑晓康, 等. 基于太赫兹图像的航天复合材料粘接缺陷检测方法研究［J］. 计量学报, 2018, 39(4): 471-475.
Pan Z, Wen Y T, Zhen X K, et al. Study on nondestructive testing for bonding defects in aerospace composite based on terahertz image［J］. Acta Metrologica Sinica, 2018, 39(4): 471-475.
［8］王晓娜, 厉阳, 侯德鑫, 等. 基于热成像的薄片材料热扩散率快速无损检测［J］. 计量学报, 2016, 37(3): 260-264.
Wang X N, Li Y, Hou D X, et al. A rapid and nondestructive detection on the thermal diffusivity of thin materials based on thermography［J］. Acta Metrologica Sinica, 2016, 37(3): 260-264.
［9］骆燕燕, 冯郁竹, 郝良, 等. 超声波法在电连接器接触压力测试中的应用［J］. 计量学报, 2018, 39(1): 72-76.
Luo Y Y, Feng Y Z, Hao L, et al. Application of Ultrasonic Method in Contact Stress Testing of Electric Connector［J］. Acta Metrologica Sinica, 2018, 39(1): 72-76.
［10］Xiao X, Gao B, Tian G Y, et al. Fusion model of inductive thermography and ultrasound for nondestructive testing［J］. Infrared Physics & Technology, 2019, 101: 162-170.
［11］Coleri E, Harvey J T, Yang K, et al. A micromechanical approach to investigate asphalt concrete rutting mechanisms［J］. Constr Build Mater, 2012, 30: 36-49.
［12］Jia L C, Chen M, Sun L T, et al. Experimental study on propagation of hydraulic fracture in volcanic rocks using industrial CT technology［J］. Petroleum Exploration and Development, 2013, 40(3): 405-408.
［13］Xie H H, Jiang J, Yang X F, et al. Nondestructive and fined characterization of injection molded ceramic parts by industrial computed tomography［J］. Ceramics International, 2019, 45: 17283-17288.
［14］Nagai Y, Ohtake Y, Suzuki H. SegMo: CT volume segmentation using a multi-level Morse complex［J］. Computer-Aided Design, 2019, 107: 23-36.
［15］Xiao Z F, Yang Y Q, Xiao R, et al. Evaluation of topology-optimized lattice structures manufactured via selective laser melting［J］. Materials & Design, 2018, 143: 27-37.
［16］Yan C, Hao L, Husssein A, et al. Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting［J］. Materials & Design, 2014, 55: 533-541.
［17］ Zargarian A, Esfahanian M, Kadkhodapour J, et al. On the fatigue behavior of additive manufactured lattice structures［J］. Theoretical and Applied Fracture Mechanics, 2019, 100: 225-232.
［18］Kang D, Park S, Son Y, et al. Multi-lattice inner structures for High-strength and light-weight in metal selective laser melting process［J］. Material & Design, 2019, 175: 107786.
［19］Bill L, Martin L, Phuong T, et al. Computational modelling of strut defects in SLM manufactured lattice structures［J］. Materials & Design, 2019, 171: 107671.