|
|
Experimental Study on the Start-up Characteristic and Isothermal Performance of the N-methyl Pyrrolidone Heat Pipe |
TONG Wen-yu1,2,ZHANG Guang-ming1,YU Li-li1,YAN Xiao-ke2,ZHANG Kai3 |
1. Nanjing Tech University, Jiangsu, Nanjing, 211816, China
2. National Institute of Metrology, Beijing 100029, China
3. University of Science & Technology Beijing, Beijing 100083, China |
|
|
Abstract A medium-temperature heat pipe fixed-point furnace that reproduces the freezing point of tin needs to select a medium-temperature heat pipe with a suitable working medium. Two gravity heat tubes(1#, 2#)with N-methyl pyrrolidone (NMP)as working fluid were developed, and the experimental study on the start-up characteristic and isothermal performance of NMP heat pipe under the same constant temperature heating conditions were carried out. The results showed that the start-up time and the stability of No.2 heat pipe is superior to the No.1 and the NMP heat pipe can be operated in the temperature range from 170℃ to 320℃. In addition, the start-up characteristic and isothermal performance can be affected by the fabrication process of the heat pipe. Under the same operating conditions, the more reasonable the heat pipe fabrication process, the higher the upper temperature of the heat pipe condensation section.
|
Received: 29 September 2018
Published: 17 February 2020
|
|
|
|
|
[1]庄俊, 张红. 热管技术及其工程应用[M]. 北京: 化学工业出版社, 2000.
[2]闫小克, 吕卓凡, 马重芳, 等. 高精度钠热管固定点炉及其等温特性[J]. 计量学报, 2009, 30(6): 489-492.
Yan X K, Lv Z F, Ma C F, et al. High Precise Sodium Heat-Pipe Fixed Point Furnaces and Their Isothermal Characteristics[J]. Acta Metrologica Sinica, 2009, 30(6): 489-492.
[3]赵亿坤, 王景辉, 原遵东, 等. 低温标准黑体辐射源的性能研究[J]. 计量学报, 2017, 38(5): 589-592.
Zhao Y K, Wang J H, Yuan Z D, et al. Study on the Performance of the Low-temperature Blackbody Radation Source[J]. Acta Metrologica Sinica, 2017, 38(5): 589-592.
[4]朱震, 王银峰, 熊国辉, 等. 新型水平环路热虹吸管启动性能[J]. 化工学报, 2016, 67(5): 1755-1761.
Zhu Z, Wang Y F, Xiong G H, et al. Start-up performance of novel horizontal loop thermosyphon[J]. CIESC Jorunal, 2016, 67(5): 1755-1761.
[5]刘龙兵, 张喜春. 萘工质重力热管启动性能初步实验研究[J]. 河南科技, 2014, (22): 106-107.
Liu L B, Zhang C X. A Preliminary Experimental Study on Start-up Behavior in Naphthalene Gravity Heat Pipe[J]. Journal of Henan Science and Technology, 2014 , (22): 106-107.
[6]童明伟, 陈波, 陈礼. N-甲基吡咯烷酮两相顺流热虹吸管传热特性的实验研究[C]//第三届全国热管会议. 重庆, 1991: 152-156.
[7]童明伟, 童庆明, 陈礼, 等. N-甲基吡咯烷酮两相闭式热虹吸管传热特性的实验研究[J]. 工程热物理学报, 1994, 15(2): 185-189.
Tong M W, Tong Q M, Chen L, et al. Experimental Study on Heat Pipe Transfer Performance of N-methyl pyrrolidone Two-phase Closed Thermosyphon[J]. Journal of Engineering Thermophysics, 1994, 15(2): 185-189.
[8]张子建, 孙全平. 分离式NMP-不锈钢热管传热性能的实验研究[C]//第十届全国热管会议. 贵阳, 2006: 91-97.
[9]张亮, 杨峻. 中温两相闭式热虹吸管的性能[J]. 南京工业大学学报(自然科学版), 2012, 34(3): 120-123.
Zhan L, Yang J. Test and Analysis on Performance of Closed Two-phase Thermosyphon at Moderate Temperature[J]. Journal of Nanjing Tech University(Natural Science Edition), 2012, 34(3): 120-123.
[10]马婷婷, 曾金令, 王啸远, 等. 高温异型热管启动性能实验研究[J]. 南京工业大学学报(自然科学版), 2017, 39 (3): 6-10.
Ma T T, Zeng J L, Wang X Y, et al. Experimental study on start-up characteristics of a high temperature special-shaped heat pipe[J]. Journal of Nanjing Tech University(Natural Science Edition) , 2017, 39(3): 6-10.
[11]于萍, 张红, 许辉, 等. 高温钠热管再启动特性研究[J]. 中国电机工程学报, 2015, 35(2): 404-410.
Yu P, Zhang H, Xu H, et al. Restart Characteristics of High-temperature Sodium Heat Pipe[J]. Proceeding of the CSEE, 2015, 35(2): 404-410.
[12]Hua C, Wang X H, Gao X, et al. Experimental research on the start-up characteristics and heat transfer performance of pulsating heat pipes with rectangular channels[J]. Applied Thermal Engineering, 2017, 126: 1058-1062
[13]丁林超,袁达忠,唐大伟,等. 标准黑体源用铜-R134a热管研制及均温性实验研究[J]. 计量学报, 2017, 38(3): 292-295.
Ding L C,Yuan D Z,Tang D W,et al. Development and Experimental Study on the Temperature Uniformity of Cu-R134a Heat Pipe Used for Standard Blackbody Source[J]. Acta Metrologica Sinica, 2017, 38(3): 292-295.
[14]张凯,乐恺,闫小克,等. 重力铯热管等温性能研究究[J]. 计量学报, 2020, 41(1):26-31.
Zhang K,Yue K,Yan X K,et al. Study on Isothermal Characteristics of Gravity Cesium Heat Pipe[J]. Acta Metrologica Sinica, 2020, 41(1):26-31. |
|
|
|