基于ECT的航空复合材料缺陷检测研究

doi:10.3969/j.issn.1000-1158.2019.06.03

Abstract
Figure/Table
References (17)
Related Citation (15)

Download: PDF (917 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract To solve the problem of defects during the process of production and service of aviation composite materials, a nondestructive testing method based on capacitance sensing principle that consists of a same side multi-electrode array sensor was proposed. Based on the edge effect of capacitance, a set of identical electrode array system was designed to detect the adhesive defects, the true distribution of defects in aerospace composites was simulated. The electrical capacitance tomography system worked in single electrode excitation mode, and according to the change of capacitance value caused by the change of dielectric properties of defects, the system used the conjugate gradient algorithm to detect the location and shape of the defects. The experimental results showed that the mentioned method can accurately determine the location and size of the defects, and detect the defects of 8mm adhesive structure inside the carbon fiber composite with 2mm thickness, and the images of ECT detection system were clear with less edge artifacts. The method provided a new research direction for the development of the detection of defects in composite materials.

Key words： metrology defect damage aviation composites same side multi-electrode array sensor electrical capacitance tomography conjugate gradient imaging algorithm

Received: 03 July 2018 Published: 10 October 2019

PACS:

TB971

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	JI Yan-yong
	LIU Ya-nan
	DENG Chen-xiao
	YAN Chao-qi
	CHEN Xi-yuan

Cite this article:

JI Yan-yong,LIU Ya-nan,DENG Chen-xiao, et al. Research on the Testing of Adhesive Defects of Aeronautical Composites Based on ECT[J]. Acta Metrologica Sinica, 2019, 40(6): 952-957.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2019.06.03 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2019/V40/I6/952

［1］杨乃宾. 新一代大型客机复合材料结构［J］. 航空学报, 2008, 29(3): 596-603.
Yang N B. Composite structures for new generationlarge commercial jet［J］. Acta Aeronautica et Astronatica Sinica, 2008, 29(3): 596-603.
［2］Chen L Q, GAO F, Gong X J, et al. Extraction of refractive indices of materials through transmission teraherz time-domain spectroscopy ［J］. Journal of Infrared and Millimeter Waves, 2013, 32(2): 160-164.
［3］孙犇渊, 王化祥, 王丕涛. 基于内部阵列电极的电容层析成像系统［J］. 传感技术学报, 2013, 26(6): 820-824.
Sun B Y, Wang H X, Wang P T. An Electrical Capacitance Tomography Based on Internal Array Electrodes［J］. Chinese Journal of Sensors and Actuators, 2013, 26(6): 820-824.
［4］Yang W Q, Li Y, Wu Z P, et al. Multiphase flow measurement by electrical capacitance tomography［C］//IEEE. Imaging Systems and Techniques (IST). Penang, Malaysia, 2011: 108-111.
［5］刘增华, 余锋祥, 于洪涛, 等. 基于群速度校准的超声导波技术及在复合材料缺陷检测中的应用［J］. 机械工程学报, 2012, 48(20): 8-15.
Liu Z H, Yu F X, Yu H T, et al. Ultrasonic guided wave technology based on group velocity calibration and its application for defect detection in composite plates［J］. Chinese Journal of Mechanical Engineering, 2012, 48(20): 8-15.
［6］徐丽, 张幸红, 韩杰才. 射线检测在复合材料无损检测中的应用［J］. 无损检测, 2004, 26(9): 450-456.
Xu L, Zhang X H, Han J C. Application of radio graphic inspection methods for composite［J］. Nondestructive Testing, 2004, 26(9): 450-456.
［7］张建, 李艳军, 张丽娜. 航空复合材料智能敲击检测方法研究［J］. 航空计算技术, 2016, 46(5): 119-126.
Zhang J, Li Y J, Zhang L N. Research on smart tap testing of aviation composite material［J］. Aeronautical Computing Technique, 2016, 46(5): 119-126.

［8］邓晓东, 成来飞, 梅辉, 等. C/SiC复合材料的定量红外热波无损检测［J］. 复合材料学报, 2009, 26(5): 112-119.
Deng X D, Cheng L F, Mei H, et al. Infrared thermal wave imaging for nondestructive detection and measurement of the C/SiC composites［J］. Acta Materiae Compositae Sinica, 2009, 26(5): 112-119.
［9］马保全, 周正干. 航空航天复合材料结构非接触无损检测技术的进展及发展趋势［J］. 航空学报, 2014, 35(7): 1787-1803.
Ma B Q, Zhou Z G. Progress and development trends of composite structure evaluation using noncontact nondestructive testing techniques in aviation and aerospace industries［J］. Acta Aeronautica et Astronautica Sinica, 2014, 35(7): 1787-1803.
［10］潘钊,温银堂,郑晓康,等. 基于太赫兹图像的航天复合材料粘接缺陷检测方法研究［J］. 计量学报, 2018, 39(4): 471-475.
Pan Z, Wen Y T, Zheng X K, et al. Study on Nondestructive Testing for Bonding Defects in
Aerospace Composite Based on Terahertz Image［J］. Acta Metrologica Sinica, 2018, 39(4): 471-475.

［11］Liu C, Xu L J, Cao Z. Measurement of nonuniform temperature distribution by combining line-of-sight TDLAS with regularization methods［J］. Instrumentation, 2014, 1(3): 43-57.
［12］张立峰,刘晶,田沛. 一种电容层析成像系统电极组合激励测量方法［J］. 计量学报, 2017, 38(4): 469-472.
Zhang L F,Liu J,Tian P. An Exciting-measuring Mode for Electrical Capacitance Tomography System［J］. Acta Metrologica Sinica, 2017, 38(4): 469-472.

［13］Nissinen A, Lehikoinen A, Mononen M, et al. Estimation of the bubble size and bubble loading in a flotation froth using electrical resistance tomography［J］. Minerals Engineering, 2014, 69: 1-12.
［14］马敏, 吴海超. 基于ECT的飞机复合材料检测方法研究［J］. 仪表技术与传感器, 2014,(7): 100-102.
Ma M, Wu H C. Research on detection method for aerial composite materials based on ECT［J］. Instrument Technique and Sensor, 2014, (7): 100-102.
［15］马敏,王伯波,闫超奇,等. 基于旋转电极的电容层析成像技术图像融合算法［J］. 计量学报, 2018, 39(1): 43-46.
Ma M, Wang B B, Yan C Q, et al. Image Fusion Algorithm-Based Rotating Electrodes for
Electrical Capacitance Tomography［J］. Acta Metrologica Sinica, 2018, 39(1): 43-46.
［16］Huang Y L, Li B, Liu Y J, et al. Notice of Retraction Image Retrieval Using Pulse-Coupled Neural Networks and Correlation Coefficient［C］// IEEE. 2nd International Conference on Information Engineering and Computer Science. Wuhan, China, 2010: 1-4.
［17］陈德运, 高明, 宋蕾, 等. 一种新型的三维ECT传感器及三维图像重建方法［J］. 仪器仪表学报, 2014, 35(5): 961-968.
Chen D Y, Gao M, Song L, et al. Novel 3D ECT sensor and its 3D image reconstruction method［J］. Chinese Journal of Scientific Instrument, 2014, 35(5): 961-968.