基于吸振器控制的两自由度轧机辊系特性研究

doi:10.3969/j.issn.1000-1158.2019.05.21

Abstract
Figure/Table
References (11)
Related Citation (15)

Download: PDF (454 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Considering the nonlinear spring force constraint of the four-roll mill hydraulic cylinder, the vibration absorber control device was introduced. Then, a two-degree-of-freedom rolling mill roll model with a vibration absorber was established. By analyzing the equilibrium point of the rolling mill coupling system, it is concluded that increasing the stiffness coefficient of the vibration absorber can effectively avoid the Hopf bifurcation and chaotic dynamic behavior. By analyzing the spectrum curve and the time domain curve, it is concluded that the vibration absorber device can be increased the distance between the resonant frequency. The main resonance frequency, and shorten the time when the rolling mill roller system converges from the unstable state to the stable period. Through the amplitude-frequency characteristic curve, it is concluded that reducing the mass of the vibration absorber within a certain range can improve the stability of the system. Increasing the spring force of the vibration absorber, the unstable region of the system can be get smaller. Increasing the friction of the vibration absorber, the vibration amplitude of the system can be reduced.

Key words： metrology shock absorber rolling mill amplitude-frequency characteristic nonlinearity

Received: 16 April 2018 Published: 01 September 2019

PACS:

TB936

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	LIU Bin
	JIANG Jia-lei
	PAN Gui-xiang
	WANG Xiao-dong

Cite this article:

LIU Bin,JIANG Jia-lei,PAN Gui-xiang, et al. Research on Roller Characteristics of Two Degree of Freedom Rolling Mill Based on Vibration Absorber Control[J]. Acta Metrologica Sinica, 2019, 40(5): 868-874.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2019.05.21 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2019/V40/I5/868

［1］Bayón A, Gascón F, Medina R, et al. On the flexural vibration of cylinders under axial loads: Numerical and experimental study ［J］. Journal of sound and vibration, 2012, 331(10): 2315-2333.
［2］Khramshin V R, Evdokimov A S, Kornilov G P, et al. System for speed mode control of the electric drives of the continuous train of the hot-rolling mill ［C］// Control and Communications (SIBCON), 2015 International Siberian Conference on. IEEE, 2015: 1-6.
［3］Stürmer M, Dagner J, Manstetten P, et al. Real-time simulation of temperature in hot rolling rolls ［J］. Journal of Computational Science, 2014, 5(5): 732-742.
［4］刘彬, 姜甲浩, 刘飞, 等. 基于轧件水平振动的轧机辊系振动补偿模型［J］. 计量学报, 2018, 39(1): 56-60.
Liu B, Jiang J H, Liu F, et al. Compensative Vibration Model of Roll System Based on Horizontal Vibration of Rolled Piece ［J］. Acta Metrologica Sinica, 2018, 39(1): 56-60.
［5］谢长贵, 曾海. 1220冷连轧机带钢表面振纹机理的研究［J］. 计量学报, 2015, 36(6): 595-599.
Xie C G, Zeng H. Mechanism of the Strip Surface Chatter Marks of the 1220 Cold Rolling Mill ［J］. Acta Metrologica Sinica, 2015, 36(6): 595-598.
［6］朱勇, 姜万录, 刘思远, 等. 非线性液压弹簧力对电液伺服系统非线性动力学行为影响的研究［J］. 中国机械工程, 2015, 26(8): 1086-1098.
Zhu Y, Jiang W L, Liu S Y, et al. Research on Influences of Nonlinear Hydraulic Spring Force on Nonlinear Dynamic Behaviors of Electro-hydraulic Servo System ［J］. China Mechanical Engineering, 2015, 26(8): 1085-1091,1104
［7］范小彬, 臧勇, 王会刚. 热连轧机垂直振动特性研究［J］. 中国机械工程, 2010, 21(15): 1801-1804.
Fan X B, Zang Y, Wang H G. Research on Vertical Vibration of Hot Rolling Mill ［J］. China Mechanical Engineering, 2010, 21(15): 1801-1804.
［8］孙建亮, 刘宏民, 李琰赟, 等. 热连轧机水平振动及其与轧制参数影响关系［J］. 钢铁, 2015, 50(1): 43-49.
Sun J L, Liu H M, Li Y Y, et al. Horizontal vibration of hot rolling mill and its relationship with rolling parameters ［J］. Iron and Steel, 2015, 50(1): 43-49.
［9］高强, 房祥波, 赵艳青, 等. 变质量动力吸振器及其减振性能［J］. 长安大学学报(自然科学版), 2013, 33(5): 90-120.
Gao Q, Fang X B, Zhao Y Q, et al. Variable mass dynamic vibration absorber and its performance of vibration reduction ［J］. Journal of Changan University (Natural Science Edition), 2013, 33(5): 90-120.
［10］孟宗, 付立元, 宋明厚. 一类非线性相对转动系统的组合谐波分岔行为研究［J］. 物理学报, 2013, 62(5): 54501.
Meng Z, Fu L Y, Song M X. Bifurcation of a kind of nonlinear-relative rotational system with combined harmonic excitation ［J］. Acta Physica Sinica, 2013, 62(5): 54501.

［10］刘彬,姜佳磊,潘贵翔,等. 液压缸非线性弹簧力约束下轧机吸振器参数的优化［J］. 计量学报, 2019, 40(3): 378-384.
Liu B, Jiang J L, Pan G X, et al. Optimization of Parameters of Vibration Absorber of Rolling Mill System under the Nonlinear Spring Force of Hydraulic Cylinder［J］. Acta Metrologica Sinica, 2019, 40(3): 378-384.
［11］Grigorios A P, Andrew M S. 多尺度计算方法:均匀化和平均化［M］. 郑健龙, 李友云, 钱国平, 译. 北京:科学出版社, 2010.