基于机器视觉的条码尺精确测量技术在落纱小车中的应用

doi:10.3969/j.issn.1000-1158.2019.03.10

Abstract
Figure/Table
References (13)
Related Citation (15)

Download: PDF (1572 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract Aiming at the self-development requirement of the automatic doffer, a bar code scale measurement technique based on machine vision is designed to detect the position of the doffing vehicle in the track. The measurement method is based on the barcode scale which consists of a scale and barcode. In the experiment, the camera and the barcode scale are calibrated at the initial position of the camera. In the process of camera movement, the current corresponding barcode scale image is obtained, and the current barcode coordinates are calculated to get the displacement of the camera relating to the barcode scale. The results show that the measurement method has no error accumulation, and realizes the real-time monitoring of the vehicle during the walking process. When the frame frequency is 30 Hz, the object distance is 15 cm, the output image resolution is 640×480 pixels, and the running speed of the vehicle is less than 2 cm/s, the barcode coordinate measurement accuracy is less than 1 mm. When the speed of the vehicle is 2~6 cm/s, the coordinate measurement accuracy is 1~2 mm, when the speed of the vehicle is 6~10 cm/s, the coordinate measurement accuracy is 2~3.5 mm. The method can meet the requirement of positioning precision of a doffing cart under low-speed running conditions.

Key words： metrology barcode scale machine vision coordinate measurement doffing vehicle positioning precision radio frequency identification

Received: 01 September 2017 Published: 19 April 2019

PACS:

TB921

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	MA Dan-dan
	WANG Peng-cheng
	LIU Ji-hong

Cite this article:

MA Dan-dan,WANG Peng-cheng,LIU Ji-hong. Application of Accurate Measurement Technology of Barcode Scale in Doffing Vehicle Based on Machine Vision[J]. Acta Metrologica Sinica, 2019, 40(3): 409-415.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2019.03.10 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2019/V40/I3/409

［1］王飞, 钟馥声, 冯世亮. 基于SVPWM控制的自动落纱调速系统［J］. 制造业自动化, 2013, 35(7): 134-137.
Wang F, Zhong F S, Feng S L. The automatic doffing speed control system based on SVPWM control［J］. Manufacturing Automation, 2013,35(7): 134-137.
［2］胡玉才. 国内外新型自动络筒机发展综述［J］. 现代纺织技术, 2014, 22(3): 52-56.
Hu Y C. Overview on development of domestic and overseas new automatic winding machine［J］. Modern textile technology,2014,22(3): 52-56.
［3］马丹丹, 王静安, 刘基宏, 等. 基于RFID的自动络筒机落纱小车对位系统分析与设计［J］. 计算机应用与软件, 2017, 34(10): 35-39.
Ma D D, Wang J A, Liu J H, et al. Analysis and design of automatic winder doffing car alignment system based on rfid［J］. Computer Applications and Software, 2017,34(10): 35-39.
［4］陈丹晖, 刘红. 条码技术与应用［M］. 北京:化学工业出版社, 2008.
［5］Laetus N. Pharmacode Guide ［M］. Sandberg, Germany: Gertebau GmbH, 1997:27-30.
［6］何军, 康景利. 条形码的计算机编码与识别［J］. 计算机测量与控制, 2002, 10(4): 263-266.
He J, Kang J L. Computer Coding and Decoding of Bar Code［J］. Computer Measurement & Control,2002,10(4): 263-266.
［7］徐德, 谭民, 李原. 机器人视觉测量与控制［M］. 3版. 北京:国防工业出版社, 2016.
［8］关天顾. 游标卡尺精度分析［J］. 计量技术, 1978,(1): 18-24.
［9］钱金超. 一种采用条码尺的高准确度位移测量应用研究［D］. 南京:南京理工大学, 2015.
［10］Russ J C. The Image Processing Handbook［M］. Springer, New York: CRC Press, 2011:154-196.
［11］章毓晋. 计算机视觉教程［M］. 北京:人民邮电出版社, 2011.
［12］但渝霞. 游标卡尺测量误差来源分析［J］. 计量与测试技术, 2009, 36(8): 12-13.
Dan Y X. The Origin Analysis of Measuring Error for Vemier Calipers ［J］. Metrology and Measurement Technique, 2009,36(8): 12-13.
［13］任永杰, 邾继贵, 杨学友, 等. 基于距离精度的测量机器人标定模型及算法［J］. 计量学报, 2008, 29(3): 198-202.
Ren Y J, Zhu J G, Yang X Y, et al. Measurement Robot Calibration Model and Algorithm Based on Distance Accuracy［J］. Acta Metrologica Sinica, 2008,29(3): 198-202.