|
|
|
| Optimization of acoustic waveguides for acoustic gas thermometry |
| CHEN Hou-hua1,2,FENG Xiao-juan2,LIN Hong2,ZHANG Jin-tao2,REN Cheng3,WANG Ke-jian1 |
1. Electrical and Mechanical College, Beijing University of Chemical Technology, Beijing 100029, China
2. Division of Thermophysics and Process Meas, National Institute of Metrology, Beijing 100029, China
3. Institute of Nuclear and New Energy Technology, Tsinghua University, Beijing 100084, China |
|
|
|
|
Abstract The measurement of the thermodynamic temperature with acoustic gas thermometry from 600 K to 1358 K is a promising research direction suggested by the international temperature metrology community. However, traditional acoustic transducers cannot operate at temperatures higher than 400 K, and the solution is to use high temperature alloy acoustic waveguides to transfer the sound from room temperature to high temperature. The design of the acoustic waveguides is key to the signal-to-noise ratio of the acoustic resonances. Acoustic waveguides with larger inner diameter and shorter length are good for the signal transfer, but it will cause larger perturbation to the acoustic resonator. A new kind of acoustic waveguides with variable dimensions to reduce energy loss along the waveguides as well as the perturbation from the ducts was proposed, and a model of the energy loss and the perturbation for the new design was developde, compared the sound attenuation and the perturbation to the acoustic resonance frequencies and half-widths for different dimensions of the waveguides. The optimized design of the acoustic waveguides can reduce the perturbation to the acoustic resonance frequency to below 3×10-5 for the first longitudinal non-degenerate mode of a cylindrical resonator with an inner length of 80 mm. This research contributes to the further study of high-temperature acoustic gas thermometry.
|
|
Received: 01 November 2017
Published: 07 January 2019
|
|
|
|
|
|
［1］Landau L D, Lifshitz E M. Statistical Physics Part 1［M］. 3rd ed. Amsterdam:Elsevier, 1986.
［2］Machin G, Engert J, Gavioso R M, et al. The Euramet Metrology Research Programme Project Implementing the New Kelvin (InK)［J］. International Journal of Thermophysics, 2014, 35(3-4):405-416.
［3］Fenn J B, Baierlein R . Engines, Energy and Entropy: A Thermodynamics Primer［J］. American Journal of Physics,1983,51(2):189-190.
［4］Fischer J, Podesta M, Hill K D, et al. Present estimates of the differences between thermodynamic temperatures and the ITS-90 ［J］. International Journal of Thermophysics, 2011, 32(1-2):12-25.
［5］Moldover M R, Gavioso R M, Mehl J B, et al. Acoustic gas thermometry ［J］. Metrologia, 2014, 51(1): R1-R19.
［6］郑荣伟,冯晓娟,伍肆,等. 近临界二氧化碳声速的精密测量研究 ［J］. 计量学报, 2017, 38(1):1-6.
Zheng R W, Feng X J, Wu S, et al. Sound speed measurement for carbon dioxide near the critical region［J］. Acta Metrologica Sinica, 2017, 38(1):1-6.
［7］Rippple D C, Murdock W E, Strouse G F, et al. Room temperature acoustic transducer for high-temperature thermometry ［C］ //Temperature: Its Measurement and Control in Science and Industry, New York, 2012:44-49.
［8］Feng X J, Gillis K A, Moldover M R, et al.Microwave cavity measurements for gas thermometry up to the copper point ［J］. Metrologia, 2013, 50(3): 219-226.
［9］Zhang K, Feng X J, Gillis K A, et al. Acoustic and microwave tests in a cylindrical cavity for acoustic gas thermometry at high temperature［J］. Philosophical Transactions,2016, 374:20150049.
［10］高结, 冯晓娟, 林鸿,等.声学温度计中声波导管声学传感器的研究［J］.仪器仪表学报, 2014, 35(3):627-633.
Gao J, Feng X J, Lin H, et al. Study on acoustic transducer with acoustic ducts in acoustic thermometry ［J］. Chinese Journal of Scientific Instrument, 2014, 35(3):627-633.
［11］Lin H, Feng X J, Gillis K A, et al. Improved determination of the Boltzmann constant using a single, fixed length cylindrical cavity ［J］. Metrologia,2013,50(4):417-432.
［12］尹钊玮,冯晓娟,林鸿,等. 非连续边界层对圆柱声学共鸣频率的影响研究 ［J］.计量学报, 2014, 35(1):1-4.
Yin Z W, Feng X J, Lin H, et al. The discontinuous boundary layer effects on acoustic resonance frequency in cylindrical cavity ［J］. Acta Metrologica Sinica, 2014, 35(1):1-4.
［13］尹钊玮,冯晓娟,林鸿,等. 高压气体声速精密测量系统的研制与测试 ［J］. 仪器仪表学报, 2013, 34(4):774-779.
Yin Z W, Feng X J, Lin H, et al. Development and test of precision sound speed measurement system for gases at high pressure ［J］. Chinese Journal of Scientific Instrument, 2013, 34(4):774-779.
［14］崔劲,冯晓娟,林鸿,等. 单圆柱微波谐振法测量热力学温度的研究［J］.计量学报, 2018, 39(2): 255-261.
Cui J, Feng X J, Lin H, et al. Thermodynamic Temperature Measurement Using Single Cylindrical Microwave Resonator［J］. Acta Metrologica Sinica, 2018, 39(2): 255-261.
［15］Trusler J P M. Physical acoustics and metrology of fluids ［M］. New York: Adam Hilger, 1991.
［16］Zhang J T, Lin H, Feng X J, et al. Progress toward redetermining the Boltzmann constant with a fixed-path-length cylindrical resonator ［J］. International Journal of Thermophysics, 2011, 32(7-8): 1297-1329.
［17］Gillis K A, Mehl J B, Moldover M R. Theory of the Greenspan Viscometer ［J］. Journal of the Acoustical Society of America, 2003, 114(1): 166-73.
［18］张方,战可涛,冯晓娟,等. 导管对圆柱共鸣腔径向共振模式的扰动 ［J］. 计量学报, 2011, 32(5):455-458.
Zhang F, Zhan K T, Feng X J, et al. Duct perturbations to the radial modes of cylindrical resonators［J］. Acta Metrologica Sinica,2011,32(5):455-458.
［19］Crandall I B. Theory of vibrating systems and sound ［M］. New York: D. Van Nostrand company,1927.
［20］Gillis K A, Lin H, Moldover M R. Perturbations from ducts on the modes of acoustic thermometers ［J］. Journal of the National Institute of Standards & Technology, 2009, 114(5): 263-285.
|
|
|
|
2019, Vol. 40 
