|
|
|
| Joule Balance Alignment Energy Error Evaluation by Horizontal Ampere Force and Electromagnetic Torque |
| ZENG Tao1,LU Yun-feng2,LI Zheng-kun2 ,ZHANG Zhong-hua2,CHEN Le1,CHEN Xiao-ming3 |
1. China Jiliang University, Hangzhou, Zhejiang 310018, China
2. National Institute of Metrology, Beijing 100029, China
3. KL of Hydraulic & Hydro-Power Surface Technology, Hangzhou, Zhejiang 310024, China |
|
|
|
|
Abstract Based on the principle of the joule balance method, the generating mechanism of the misalignment situation of the characteristic vectors on the suspended coil was studied, and the coupling influence between the horizontal ampere force and electromagnetic torque was analyzed, thus the principle of the influence on the alignment error by the horizontal force and torque was revealed. The decoupling structure based on two flexure hinge was designed to decouple the horizontal force and torque in the range of action, and the solving models for the force and torque were also established based on the torque-balance-principle. Finally, the relative alignment error caused by the horizontal ampere force and the electromagnetic torque was evaluated to be approximately 1×10-6 based on the solving models.
|
|
Received: 20 December 2017
Published: 06 November 2018
|
|
|
|
|
|
［1］Thomas M, Ziane D, Pinot P, et al. A determination of the Planck constant using the LNE Kibble balance in air［J］. Metrologia, 2017,54(4): 468-480.
［2］Li Z, Zhang Z, Lu Y, et al. The Design and construction of the joule balance NIM-2［J］. IEEE Transactions on Instrumentation & Measurement, 2017, 66(6):1 329-1 336.
［3］Li Z, Zhang Z, Lu Y, et al. The first determination of the Planck constant with the joule balance NIM-2［J］. Metrologia, 2017, 54(5): 763-774.
［4］张钟华,李辰,贺青,等.能量天平研究进展［J］. 计量学报,2014,35(4):305-310.
［5］Zeng T, Lu Y, Liu Y, et al. A capacitive sensor for the measurement of departure from the vertical movement［J］. IEEE Transactions on Instrumentation & Measurement,2016, 65(2): 458-466. |
|
|
|
2018, Vol. 39 
