电容层析成像混联归一化模型研究

doi:10.3969/j.issn.1000-1158.2018.05.14

Abstract
Figure/Table
References (13)
Related Citation (15)

Download: PDF (923 KB) HTML (1 KB)
Export: BibTeX | EndNote (RIS)

Abstract During the process of image reconstruction for electrical capacitance tomography technology, a hybrid normalization model of capacitance measurements is presented to obtain better describe of the permittivity distribution of the two-phase or multiphase media. The weight factor used in the presented hybrid normalization model is calculated based on the ratio of the minimum distance to the maximum distance between the subdivision element and electric field center line. And then, the corresponding sensitivity matrix is computed. Simulation and static test are carried out and the results show that both the accuracy and the shape fidelity can be improved obviously.

Key words： metrology;electrical capacitance tomography;image reconstruction;normalization model;electrical field center line multiphase flow

Received: 31 May 2017 Published: 05 September 2018

PACS:

TB937

Corresponding Authors: Li-Feng ZHANG E-mail: hdlfzhang@126.com

	Service

	E-mail this article
	Add to my bookshelf
	Add to citation manager
	E-mail Alert
	RSS
	Articles by authors
	ZHANG Li-feng
	ZHU Feng

Cite this article:

ZHANG Li-feng,ZHU Feng. Research on Hybrid Normalization Model of Electrical Capacitance Tomography[J]. Acta Metrologica Sinica, 2018, 39(5): 675-678.

URL:

http://jlxb.china-csm.org:81/Jwk_jlxb/EN/10.3969/j.issn.1000-1158.2018.05.14 OR http://jlxb.china-csm.org:81/Jwk_jlxb/EN/Y2018/V39/I5/675

［1］刘靖, 孙猛, 刘石, 等. 电容层析成像技术测量煤粉输送浓度的研究［J］. 计量学报, 2011, 32(1):31-35.
［2］Makkawi Y T,Wright P C. Fluidization regimes in a conventional Fluidized bed characterized by means of electrical capacitance tomography［J］. Chemical Engineering Science, 2002, 14(4):2411-2437.
［3］王化祥. 电学层析成像［M］. 北京:科学出版社,2013.
［4］Yang W Q, Peng L H. Image reconstruction algorithms for electrical capacitance tomography［J］. Measurement Science and Technology, 2003, 14(1):R1-R13.
［5］张立峰, 田沛, 马平, 等. 一种新的电容层析成像电容测量值归一化模型［J］. 中国电机工程学报, 2011, 31(17):86-90.
［6］Kim Y S, Lee S H, Ijaz U Z,et al. Sensitivity map generation in electrical capacitance tomography using mixed normalization models［J］. Measurement Science and Technology,2007, 18 (7):2092-2102.
［7］Dong X Y, Guo S Q. Image reconstruction method for electrical capacitance tomography based on the combined series and parallel normalization model［J］. Measurement Science and Technology, 2008, 19(4):1032-1039.
［8］李柳, 邵富群, 王占军. 电磁层析成像中新型归一化算法的设计与实现［J］. 计量学报, 2014, 35(1):49-53.
［9］张立峰. 电学层析成像激励测量模式及图像重建算法研究［D］. 天津:天津大学, 2010.
［10］何世钧, 张婷, 何海洋, 等. 多权值电容归一化方法的研究［J］. 计量学报, 2017, 38(3):319-323.
［11］张立峰, 刘晶, 田沛. 一种电容层析成像系统电极组合激励测量方法［J］. 计量学报, 2017, 38(4):469-472.
［12］Loser T,Wajman R,Mewes D. Electrical capacitance tomography: image reconstruction along electrical field lines［J］. Measurement Science and Technology, 2001, 12(8):1083-1091.
［13］Zhang L F,Wang H X. Identification of oil-gas two-phase flow pattern based on SVM and electrical capacitance tomography technique［J］. Flow Measurement and Instrumentation, 2010, 21(1): 20-24.