|
|
|
| Measurement Research on Mass Property Parameters of Unmanned Aerial Vehicle |
| WEN Jing-jing1,DENG Dan2,WU Bin1 |
1. College of Astronautics, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China
2. Sichuan Aerospace System Engineering Research Institute, Chengdu, Sichuan 610100, China |
|
|
|
|
Abstract Based on three-point weighing method and torsion pendulum method,a mass property measurement system which is adapted to the Unmanned Aerial Vehicle with quality of 200～1 000 kg,the total length less than 4 m,and the wingspan of no more than 2 m is designed. This system is able to measure all the quality characteristic parameters by one time, is easy to make and use. Compared with the traditional vertical installation method, small flip angle measurement is presented, which can not only improve the measurement accuracy, but also ensure the safety of the product measurement. The actual sample measurement results show that measurement time reduced by 60%, the relative errors of the measured mass centroid are all less than 1%, the relative errors of the measured moment of inertia and product of inertia are all less than 4%.
|
|
Received: 06 June 2016
Published: 11 February 2018
|
|
|
|
Corresponding Authors:
Wen Jingjing
E-mail: wjj1990@mail.nwpu.edu.cn
|
|
|
|
［1］陈平, 邓高福, 吴海瀛.飞行器模型质量特性参数一体化测量装置研究［J］. 机械科学与技术, 2015, 34(12):1891-1895.
［2］王超,张晓琳,唐文彦,等.质量特性测量系统的运动学标定［J］.计量学报,2014,35(6):595-598.
［3］王超, 唐文彦, 张晓琳, 等. 大尺寸非回转体质量特性一体化测量系统的设计［J］. 仪器仪表学报, 2012, 33(7):1634-1639.
［4］张俐,江春. 基于纵向对称面重合的机身位姿求解方法［J］. 计量学报. 2017,38 (4): 385-390.
［5］王国刚, 刘玉宝, 刘强, 等. 一种测量无人机重心和转动惯量的方法［J］. 航空兵器, 2013, (5):7-11.
［6］王瑾,孙宁. 基于转动惯量的刚体9个惯性参数的测量［J］. 计量学报, 2012,33(2): 135-139.
［7］王超. 大尺寸飞行器质量特性测量关键技术研究［D］. 哈尔滨:哈尔滨工业大学, 2014:76-91.
［8］Boynton R, Wiener K. Mass properties measurement handbook［R］. SAWE Paper No.2444, Berlin,1998:17-49.
［9］Boynton R. Precise measurement of mass［J］. Soc Allied Weight Engineers, 2001,8:1-30.
［10］Swank A J, Hardham C, Sun K X , et al. Moment of inertia measurement using a five-wire torsion pendulum and optical sensing［J］. American Society for Precision Engineering, 2006:126-130.
［11］Zhao Y, Zhang X L, Wang J, et al. Measurement of Moment of Inertia Based on Torsion Pendulum［C］//International Conference on Advances in Mechanics Engineering, 2012, 964-967.
［12］吴斌, 杨全洁. 用扭摆法测导弹惯性积的误差分析［J］. 弹箭与制导学报, 2005, 25(4):153-155.
［13］费业泰. 误差理论与数据处理［M］. 5版. 北京:机械工业出版社,2005:52-97.
［14］李化义,张迎春,李葆华,等. 高精度转动惯量测量仪分析与设计［J］. 计量学报, 2004,25(3): 250-253.
［15］冯艳秋. 转动惯量测量测试系统设计及精度分析［D］. 长春:长春理工大学,2011:25-39. |
|
|
|
2018, Vol. 39 
