Measurement of Line-width and Line-width Roughness Based on Equivalent Area
LI Hong-bo1,2,ZHAO Xue-zeng2,ZHAO Wei-qian1
1. School of Optoelectronics, Beijing Institute of Technology, Beijing 100081, China
2.AVIC Changcheng Institute of Metrology, Beijing 100095, China
3. School of Mechanical and Electrical Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China
Abstract:A method to measure line-width and line-width roughness (LWR) is presented based on the outline feature of the step scanned by AFM. Ideally, the step cross-section along the direction of the line-width is rectangle, whose area, S, is the product of height and line-width. Actually, the outline of the step cross-section is polygonal, whose area, S1, is equaled to S. The height of the profile scanned by AFM, H, is calculated by improving Tsai’s height algorithm. So, line-with, We, is calculated according to S1 and H. LWR is also calculated according to its definition as the 3σ value of line-width variation.
[1]ITRS. Metrology 2007[EB/OL]. http://www.itrs.net/Links/2007ITRS/2007_Chapters/2007_Metrology.pdf.
[2]Cramer H,Kiers T,Vanoppen P,et al.Total test repeatability,a new figure of merit for CD metrology tools[C]//SPIE. SPIE Microlithgraphy Conference 2003, Santa Clara, 2004, 5375(1): 1254-1264.
[3]Yamaguchi A, Steffen R, Kawada H, et al. A discussion on how to define the tolerance for line-edge or linewidth roughness and its measurement methodology [J]. IEEE Transactions on Semiconductor Manufacturing, 2007, 20(4):549-555.
[4]Thiault J, Foucher J, Tortal J H, et al. Line edge roughness characterization with a three-dimensional atomic force microscope: Transfer during gate patterning processes [J]. J Vac Sci Technol, 2005, B23(6): 3075-3079.
[5]Orji N G, Vorburger T V, Fu J, et al. Line edge roughness metrology using atomic force microscopes [J]. Meas Sci Technol, 2005, (16): 2147–2154.
[6]赵学增, 褚巍, Theodore T V, 等. 基于AFM的纳米尺度线宽计量模型及其算法的研究[J]. 机械工程学报, 2004, 40(4): 50-57.
[7]徐毅,高思田,李晶. 纳米、亚微米标准样板及SPM量值溯源[J].计量学报, 2003,24(2):81~84.
[8]王凌,赵学增,褚巍,等.一个基于直方图的纳米尺度线宽计算模型[J].计量技术, 2004, (3):3-6.
[9]Tsai V W. Calibration of atomic force microscopes with silicon atomic step artifact [D]. College Park : University of Maryland, 1998.
[10]李洪波, 赵学增. 基于AFM的刻线线宽粗糙度的测量[J].机械工程学报, 2008, 45(8): 222-227.